Your Universal Remote Control Center
RemoteCentral.com
One For All & Radio Shack Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 2 made on Friday February 14, 2003 at 18:08
edmund
Elite Member
Joined:
Posts:
April 2002
13,838
Code 0067 is the JVC A-code, JVC vcr's have two codes, the OFA code for the B-code is 0008, which isn't in the 8910. You have a choice of having the 8910 upgraded with code 0008, or change your vcr to accept the A-code. I think it's easier to change your vcr. Once done, code 0067 will work. To change, load code 0067 into the 8910, then unplug the vcr from the wall, plug it back in, press power on the 8910, or any button. Now it should work with code 0067. You need to change your oem remote too;

1. While holding the MBR SET(A/B) button
2. press 1
3. press stop


Hosting Services by ipHouse