Hello I'm PSPMAN90!

Ok here is the prob:

I usually enter and get out of this Urb where I live and There is a Access Control (Gate)
that use Multi-Code Reciever.

Like this:[Link: aaaremotes.com] (doesn't mean that is that one but u get the idea)

And well people use this type of Remote control to open this Gate:

[Link: us.st12.yimg.com]

So My mom has one and I open in the back where the Battery goes and there is the

10 dip switch programming, one (1) button

That any number combination u put there will be the actual access code to open gate.

Since this work with 10 small switches that are programed in order to the remote work.

"ON" when the switch is pressed next to the number.
"OFF" Opposite of ON.

Legend:
[*]= ON
[]= OFF

Switches
------------------------
1 2 3 4 5 6 7 8 9 10 |
[][][][*][*][][][*][*][] |
------------------------

Code
"ON" = 4,5,8,9
"OFF" = 1,2,3,6,7,10

So the code would be 4,5,8,9,OFF where "OFF" are all the turn off switch.

Now that I know the Access code, how I do to make a rdf file that work in the "IR COMMANDER" made by Ah_Man, for the PSP; so the PSP would be my Remote Control to access to my Urb without waitting outside for someone to oppen the gate.

Well I look at one of the Ah_Man rdf files " Panasonic TV.rdf" and "Xbox DVD remote.rdf " that are simple Pronto Hex codes patterns to make a Button Function.

see some examples of what I'm talking:

Only when pronto code needs to be on a single line, it must not chop
it into multiple lines even if it's very long.
Example:

(PSP)Button = (Multi code 1 access button) Device Button
0000 0021 0023 0003 XXXX XXXX XXXX

X= Any number

"So here in the Forum you will see them " chopped " by the limited horizontal space available"

This is an Xbox Remote rdf to control the XBOX with the IR COMMANDER(PSP) when seeing a DVD.

TITLE=XBOX Remote
BITMAP_OVERLAY=Xbox.bmp
UP=Up
0000 0048 0000 001a 00e3 00e7 001c 003a 001c 0074 001c 003a 001c 0074 001c 003a 001c 0073 001c 003a 001c 0074 001c 0073 001c 003a 001c 003a 001c 0074 001c 0073 001c 003a 001c 0074 001c 003a 001c 0074 001c 003a 001c 0073 001c 003a 001c 003a 001c 0073 001c 0073 001c 003a 001c 01d3
DOWN=Down
0000 0048 0000 001a 00e4 00e7 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0073 001d 0073 001d 0039 001d 0039 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0039 001d 0073 001d 0073 001d 0073 001d 01d2
CROSS=Select
0000 0048 0000 001a 00e4 00e7 001d 0039 001d 0073 001d 0039 001d 0073 001d 0073 001d 0073 001d 0073 001d 0073 001d 0039 001d 0073 001d 0039 001d 0039 001d 0073 001d 0039 001d 0073 001d 0039 001d 0039 001d 0039 001d 0039 001d 0039 001d 0073 001d 0039 001d 0073 001d 0073 001d 01d3

So now that u know what Is the format I'm asking for, How do I make a rdf of a Multi-Code (by Linear Company) 3089 1 button device? To use it with the IR COMMANDER" made by Ah_Man for the PSP-1000 to Open the gate of my Urb in order to enter and get out when I need to.

Please help!

Any Ideas would be good!

I just don't want to spend 40 bucks in a Multi-Code 3089 Remote to access to the urb I live, when all I need is a rdf that acts as the Code of the Remote and the IR COMMANDER as the Remote itself with the PSP.

Thanks! I hope someone help me :)

PSPMAN90