On 04/06/05 09:28 ET, Robert_F said...
Frank I forgot to mention I'm using an ipaq 3950.
You have the 3970 listed as tested on your site
so I had hoped for better results!
The iPaq 3950 has two IR- LED's included.
One consumer IR- LED for NEVO and one IrDA- LED for data transfers.
The UEI- CIR controller is still not supported by RC II, so its uses the IrDA- port instead.
Unfortunately all CIR- capable iPAQs (2200, 3950, 3970, 5400) have a very short IrDA- transmit range (less than 3-4 feet, up to 10 times less than other PocketPC's).
I have never tested the iPAQ 3950, but this should be compatible to the 3970.
Does the IR- code learning work ?
Have you tested this with other devices ?
On 04/06/05 09:09 ET, Robert_F said...
Still no response then a screen says
I've reached the keypress limit of my trial. You
must be kidding! How can I evaluate a program
that limits me so much? I couldn't get it to do
one action before it shut down. Any comments Frank?
Thanks
The trial version is limited to thirty IR- transmissions per session. This means you can restart RC II and send again 30 times.
Frank
www.WinCESoft.de
