this is what I've done with no success:

Electrohome Universal.ccf is the working file for pronto i found in the RemoteCentral.com archive

I open it with CCF Explorer or Pronto Edit and I copy the IR Code

This is HELP button:

Button: Help
[C] 3
Position: 010059
Type: 03E7
Structure Size: 98
IR Code Size: 92
0000 000C 000E 0007 0084 0294 0084 0108 0108 0084
0084 0084 0084 0084 0084 0084 0084 33DE 0084 0294
0084 0108 0084 0084 0084 0084 0084 0084 0108 0084
0084 33DE 0084 0294 0084 0108 0084 0084 0084 0084
0084 0084 0108 0084 0084 33DE

With Decode CCF I can get more information about it:

"Function"=3
"Once" = 345.429
"TopFreq" = M

Then paste the hex code:

0000 000C 000E 0007 0084 0294 0084 0108 0108 0084
0084 0084 0084 0084 0084 0084 0084 33DE 0084 0294
0084 0108 0084 0084 0084 0084 0084 0084 0108 0084
0084 33DE 0084 0294 0084 0108 0084 0084 0084 0084
0084 0084 0108 0084 0084 33DE

into the IR-Code A of HELP command in RC2

and click Apply

now RC2 shows this informations:

Code Format=1
AvgBurstLen= 0 Tks
Carrier= 335.127 Khz
OneTimeLen= 14 Bst
RepeatTimeLen= 7 Bst
Duration= 141 ms
Signal Len= 520938 Tks

and doesn't works, any command is working

why this difference between original CCF file and RC2:

"Once" = 345.429 Carrier= 335.127 Khz

maybe the problem?

The RC2 parameters are stored in that hex code or I have to tweak it manually?

This message was edited by lanzo on 08/28/05 07:08 ET.