I'm getting crazy because Remote Control II seems to learn but the ECP doesn't respond to simpad commands

I found some tips on remotecentral.com:

[Link: remotecentral.com]

this file

[Link: remotecentral.com]

this is the readme:

*********
Electrohome Universal CCF (requires ProntoEdit 1.05)

(Package includes AVIA Navigation CCF)

By Guy Kuo

Implements controls for the following CRT Projector series:

Electrohome ECP (Low frequency IR)
Electrohome ECP (High frequency IR)
Electrohome Marquee (High frequency IR)
Vidikron Vision (HIgh frequency IR)

Includes discrete power a standby codes

"Electrohome Universal.ccf" enables Pronto control of Electrohome Low or High Freq ECP, Marquee, and Vidikron video projectors. Until now, the Pronto could not be used with the 336 KHz high frequency Marquee or Vidikron projectors due to inablity to learn the codes. High freq ECP could be controlled but with limited reliability using learned low freq codes. This ccf contains new high freq codes which were synthesized using a custom program I wrote and thus bypassing the Pronto's high freq learning problem.

Low frequency ECP codes were also generated using the same program. This created discrete power, mute, & standby codes not on the original low freq ECP remote.

Codes are provided on single panel for each class projector. The buttons are small so I recommend aliasing to the code buttons rather than directly using the macor group panels.

The "Marquee/Vidikron panel" implements the 336 KHz protocol A signals required by those projectors. The following functions are available for the Electrohome Marquee and Vidikron Vision.

************
So the Pronto works with this CFF!

but the cff file is not compatible with RC2 and the simple hex command copy/paste doesn't work (Used CFF Explorer)

how can I get it working? What's the right program to clone CFF settings into RC2

Thank In Advance