|
|
|
RTI Control Systems Forum - View Post
|
|
|
|
|
The following page was printed from RemoteCentral.com:
Post 3 made on Monday June 2, 2003 at 08:52 |
Cougmeister Long Time Member |
|
|
Spaceman,
Yes, the input is a Remote S. I have written to Zantech. I do have a serial cable I purchased from RTIcorp, but it is relatively short, and the run is about 40 feet. There is wire in the wall for a serial cable, but it has no connectors on the end. I do not know how to connect the wires to the connectors to have them have the correct wires to the correct pins.
Can you help me with which wires to attach to which pins?
I have another problem that I have not yet fully researched. I am using an Arcam AV27 DVD. I can learn the codes with the RTI, but it doesn't respond in IR, using a zantech block input that I know emits. It doesn't work when I plug in the direct remote from the IRF-6. It does work with it's own remote and sometimes will work directly with the RTI T2 directly.
Any suggestions?
Thank you very much for your help.
Cougmeister
Cougmeister
|
|
|
|
|
|
|