Yes the codes are there. I have had some difficulty tring to figure out how to calculate the codes. I think this is the way to do so...
If you have a laptop you can connect to the serial cable this will be easier because you can direct connect with a PC using this program. Select G90 I have to assume the header info is correct by default by choosing G90. Go to command. Choose set choose set power on/off Choose value on click calculate checksum - this should fill in the checksum value (it will be used to validate that the string has not been corrupted on passthru). give it a comment "power on" not needed but will help when you pull values from file. test command if you have laptop/connection setup. add command - this will add the command to saved command list Now you can save the file out - file/save Open the file and cut/paste the data into a string command in rti. It should only be the hex values ie "A5|01|00|01|00|01|03|00|01|00|01|13|04|10|03|00|01|01|06|5A" I am not sure if the | delimiter is needed or not?
