Post 2 made on Wednesday May 10, 2006 at 18:03 |
AndyM Founding Member |
Joined: Posts: | March 2002 1,470 |
|
|
I've run across them, but never tried to use'm.
My suggestion:
Put your IR codes on the remote, set the Freq. to 0 and bump the repeats up to 6 or 7. Then set the code to only go out over the assigned output on the RP-6.
This is how you get the Sony S-link/S-Control inputs to work.
I've suggested this to other people here at RC, about the Pioneer stuff, and never heard back if it works or not. SO LET US KNOW WHAT HAPPENS.
Andy
|
|
|