On the dealer site under technical bulletins, under "Integration/Cabling", RP-6 cabling multiple together - there are several diagrams detailing sone unique processor setups. Give that a try and if it doesn't help please get back to me.
Vincent
On August 29, 2007 at 08:07, markrubin said...
Have an install with:
HT with its own RP6/RM433 for T4 and other remotes and...
Whole house system with a separate RP6/RM433/CB4's for
10 Touchpads
-want to install an additional RM433 to cover some dead
spots: can I connect the additional RM433 to BOTH RP-6's?
each RP6 is set for a different system zone code
-have experienced some lockups on the whole house system
where the RP6 is always receiving an IR signal from the
CB4's: unplugging the cable from the CB4's to the RP6
corrects problem: made sure IR sensor is turned off in
each TP and RM433 is not sending a signal: any ideas?
Thank you