Post 3 made on Friday August 10, 2007 at 22:59 |
thefish Founding Member |
Joined: Posts: | September 2001 1,721 |
|
|
Vidikron plasma in the master bed with a T4, and RP1
Vidikron Plasma in the great room with a T4, RP6, RM433.
great room and master bed are on the same floor, separated by the master bath
Other RTI stuff but not part of this problem
Master bed T4 was replaced because it rebooted all the time with a new T4. Wouldnt work, found out the old Rm433's dont work with the new Rhos T4's. Replaced the RM433 with a new one.
Master bed T4 won't talk to the great room RP6/RM433 any closer than about 30-40' (works on one side of the room, not the other) talks to the local RP1 fine.
The RP6 is talking to an Integra MZA via RS232.
Master bed plasma is on (has to be for TV), Great room plasma is off.
Wifi in the house, no crazy dimming loads, microwave and oven were off. System worked fine with the old styff, but the rebooting of the T4 everytime you touched the screen was unaccecptable.
I'm going out tomorrow to add another antenna at my expense, but I thought the RM433 was good for 100'
any ideas?
|
|
|