Post 1 made on Thursday October 18, 2007 at 08:42 |
mncsolutions Long Time Member |
Joined: Posts: | March 2007 48 |
|
|
I have a T4, K4, RP-6, CB-4, and an RM-433. I converted the T4 to K4. The T4 works fine but the K4 works then if you do something on the T4 the K4 stops functioning and I need to reset the RP-6. The RP-6 has the latest firmware. The CB-4 is connected to the RP-6 through the Patch cord. The RM-433 is connected to the RP-6. I have also tried to change the freq. for the K4 and still had the same problem.
|
|
Matthew Chartier MNC Solutions |
|