On December 19, 2007 at 13:47, estech said...
Just to recap: the 12v, ground and signal from the RM433
connect to the 12v, ground and signal "IN" of the first
RP6. Then a ground and signal "IN" is paralleled from
the first RP6 to the second RP6, and the same from the
second to the third.
Exactly like that.
Are the signal and ground wires twisted together at the
the first and second RP6s, or are they paralleled with
connecting blocks or terminal strips?
Twisted together at the first and second RP6.
I dont know what went wrong. This is quite simple. Is it possible to destroy an RM433?
The RM433s that I think I destroyed, seem to respond to the RF commands but do not make anything happen on the processor. We tried them on a single processor systems and still they do nothing.
