Post 3 made on Sunday April 13, 2003 at 16:14 |
Lyndel McGee RC Moderator |
Joined: Posts: | August 2001 12,996 |
|
|
Eigeny,
OK, I go into TSS and create an RC5 code with System=5, Command=0 and the Streamzap does not pick it up. The learned code above works just fine. I don't know what the difference is unless Streamzap has some timing things. Last night, with the RC5000i connected to the PC, I tried all 32 System values (0x00 to 0x1f) to no avail. I repeated this exercise today with the same results. Streamzap does not pick up the Pronto RC5 codes explicitly set in TSS. However, the Marantz is successfully able to reproduce the learned IR sequence that works with Streamzap. Any other suggestions?
At 2:30 this morning, I did not feel like trying to deciper the thing. Yes, I did see the M.Majoor tool but did not download it because I was attempting to go from Pronto to RC5. Not the other way around. I can learn the streamzap codes but I wanted to know what the true RC5 system was.
Lyndel
This message was edited by Lyndel McGee on 04/13/03 16:23.
|
|
Lyndel McGee Philips Pronto Addict/Beta Tester
|
|