Your Universal Remote Control Center
RemoteCentral.com
URC's Consumer Remotes Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 3 made on Thursday February 17, 2005 at 13:33
Control Remotes
Super Member
Joined:
Posts:
August 2003
3,434
Environmental changes, such as the surface you attempted to do the learning, the lighting, reflectivity, etc. could have an effect on the remote's ability to learn a command properly. Also, you can try manual learning, which is when you press Main and Ent on the MX-850 together for 10 seconds and get it into setup mode. In that mode, you can learn to the remote without the PC being connected. That's a secondary way to learn if you have problems learning through the PC. If you do use that method, please be sure to upload your program to your PC, so you have your newly learned commands in your program.

I hope this is helpful for you.



Thank you,
Damon DG
= = = = =
Control Systems Consultant & Programmer
Remote Programming Services for URC Remotes
http://www.PremierAVDesigns.com - 914-509-5360
Follow me on Twitter @HomeTheaterNY


Hosting Services by ipHouse