Post 4 made on Friday April 21, 2006 at 14:45 |
thedude1 Lurking Member |
Joined: Posts: | January 2006 7 |
|
|
This installation worked for a year, and began acting funny.
I have verified everything works via IR - Only, so that's good.
I have setup the RF / ID Codes...
The MRF-250's STATUS light is off, no interference. The power light is on. The status light flashes when RF commands are sent.
It's like there isn't any IR coming from ports 1-6 or the front of the MRF-250, though it looks like the MRF is receiving requests.
|
|
|