| Post 12 made on Tuesday April 18, 2006 at 08:13 |
Ericjb Active Member |
Joined:
Posts: | February 2004
655 |
|
|
I've never had a problem with MRF300 and H20, but I'm dying to run into it, because I want to try something. Maybe some of you could try it and report back.
When you have an IR overload situation, try cutting one wire in the emitter and place a 100 ohm resistor in series. We have to use 100 ohm resistors on CK1.2 keypads when running an emitter right off the keypad, otherwise too much signal is sent to the emitter and the B&K CT610 doesn't get enought signal to operate.
Just a suggestion, but try it and report back.
| |
|
There are 10 types of people in this world,
There are those who understand binary,
and those who don't! |
|
