On July 19, 2006 at 19:07, johnsfine said...
In MakeHex you can specify function=0..149
Then IrPanels would make an ordinary sixth panel
rather than the partially populated one.
Okay, I'll try 0..149.
Toshiba almost always uses the NEC1 protocol.
So you just need the device number. Ordinary
Toshiba TV's always use device number 64. I don't
recall device numbers of other Toshiba devices,
but they aren't hard to find online.
Thanks. So would I use the nec1.irp or the NECx1.irp?
Before testing any unknown commands on a Toshiba
TV, do a few web searches for the results others
have found. Some models of Toshiba TV can be
permanently destroyed by sending certain commands.
I hope those are only the commands for which
you can find online warnings, and I hope Toshiba
entirely stopped making that mistake several years
ago. But I'm not sure that is the case.
Thanks for that warning! I'll try to be careful. :-)
Do the functions match the labels and just the
physical position is wrong? Or what?
Yes, the functions match the labels, so there is no real problem... it is just a weirdness. :-)