Post 4 made on Tuesday December 13, 2005 at 18:13 |
Daniel Tonks Wrangler of Remotes |
Joined: Posts: | October 1998 28,780 |
|
|
Mainly you have to make sure you don't amplify too strong before running through other amps. So, if your signal is +10db at the start, you don't want to add a +20db amp on top of that and THEN run it through an 8200 since that would overwhelm it. But it's unlikely to be +10.
I would try one good amp right at the beginning. If that doesn't work or goes too strong, try splitting and then running *two* amps, one on each leg, before getting to the distribution amps.
|
|
|