Your Universal Remote Control Center
RemoteCentral.com
HDTV Reception Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Thursday December 29, 2005 at 19:46
Fred Forlano
Long Time Member
Joined:
Posts:
June 2002
433
On December 20, 2005 at 11:32, edmund said...
You're a Moron to the 5th power. whats the purpose
of posting this same question 5 times in the same
forum, and never responding to the suggestions
a few have had?

Any chance of pointing me in the direction of the pre-posted 'help'?

I have a similar issue with a customer who upgraded to HD, went to the new dish, and now I have a room with 3 runs from the dish location (2 for the multiswitch we put in for the old 2-lnb dish) and an OTA antenna (he lives on a ranch WAAAAY out in the sticks).

I need to get those 3 wires to feed me both the new HD-TiVo and the original TiVo. There is also another receiver in a different part of the house with a direct line running from the dish to that receiver.

So to summarize, I have 5 tuners, 4 of which are in 1 room with only 3 COAX runs (running another wire is a REAL pain in the arse), and a 5th tuner in a remote location with it's own dedicated line to the dish (which, btw, is 3-LNB with built-in multiswitch). Price isn't the issue here, but running that 4th line is. Any suggestions?

Thanks,

Fred Forlano
Higher Definition

p.s.: I read suggestions others post :p
"I have been marked once, my dear and let me assure you, no needle shall ever touch my skin again." -- Erik Magnus Lensherr (Magneto)


Hosting Services by ipHouse