Post 4 made on Saturday January 7, 2006 at 17:21 |
jfetter Founding Member |
Joined: Posts: | December 2001 41 |
|
|
Thanks for the support, I installed the dish myself, setting the elevation and tilt carefully per the settings for my zip code. I took extra special care to get the mounting post plumb and firmly attached with 4 concrete bolts. All that was really required was rotating to find the azimuth using 101 and then fine tuning the elevation again using 119. Though they tell you not to use the receivers strength meter, the end result was strong signals to the existing 2 Ultimate TV's and wahat appears to be all active satellites being detected by the new H20.
BTW, the harware on this new dish is outstanding! Fine tuning adjustments for both elevation and azimuth plus very strong, well built and engineered assembly...
Jack
|
|
|