I constantly programiren and always many problems - all devices do not ON and are not switched OFF SIMULTANEOUSLY !!! The control over execution is always necessary!

Now development in Russia the universal switchboard comes to an end - we give only ONE command (Radio or IR) with Pronto -ON- or other command -OFF- and the microprocessor does all itself - consistently in an automatic mode there is an inclusion and deenergizing of the equipment by means of IR-signals. The control is carried out on a current of consumption by each device which is automatically remembered in memory of the processor. Also management is carried out from +12v a source.

To the scheme it is connected also Radiochannel LI900 or similar !
All questions on e-mail [email protected]


======================================
Is required the HELP - the description (manuals) of codes RC-5 and RC-6,
and also codes of a kind
5000 .... .... .... .... ....
&
9000 .... .... .... .... ....
ànd their conformity to impulses!
======================================

With codes of a kind
0000 006C 0000 000C 0020 0020 0040 0020 0020 0020 0020 0020
0020 0020 0020 0020 0020 0020 0020 0020 0020 0040 0020 0020 0040
0020 0020 0CCD
there are no problems (w/1st 0000 !)

==========================
I shall forgive pardons for translation 8-))
Russia
Valery

My pults - ProntoProNG TSU7000 + LI900 , Marantz9500 & more, more...



This message was edited by Vall on 07/25/05 19:41 ET.