| Post 14 made on Thursday November 20, 2003 at 08:40 |
davehk Long Time Member |
Joined:
Posts: | March 2003
123 |
|
|
The TM13 should transmit on the pahse it is plugged into. Whether or not the signal reaches other phsses depends on your elecrival system over there.
If it does not, then you should, as you suggest, be able to plug a TM13 into each phase set to the same house code. Then each TM13 will receive the RF signal from the remote and sent the X10 signal onto the mains, and all should be well
| |
|
|
