Post 8 made on Wednesday December 1, 1999 at 11:33 |
At last, here's the complete code listing that I have. I have a RM-Y167 and the codes for it. It came with my TV (KV-27S45), so the instruction manual is for my TV, but it also explains how to program the remote. Each code is 3 digits. Some manufacturers have more than one code. The manufacturer code numbers appear to be in order of likelihood, and there is some overlap between manufacturers. Try each code until you find the one that works. There's a good chance that this remote uses the same codes as the RM-Y165 and RM-Y169. Note that you have to assign VCR's, etc. to the VTR/DVD button and cable/DBS receivers to the DBS/CABLE button. That means you can't control both a VCR and a DVD player at the same time.
Tips- If the remote control doesn't work, try repeating the setup procedures using the other codes listed for your equipment.
- If more than one code number is listed, try entering them one by one until you come to the correct code for your equipment.
- If you enter a new code number, the code number you previously entered at that setting is erased.
- In some rare cases, you may not be able to operate your equipment with the supplied remote control. In this case, use the equipment's own remote control unit.
- Whenever you remote the batteries, the code numbers may revert to the factory setting and must be reset.
Programming the remote for video equipment- Press CODE SET.
- Press VTR/DVD (FUNCTION).
- Use the 0-9 buttons to key in the manufacturer's code number from the following chart.
- Press ENTER.
VCR manufacturer code numbersManufacturer | Code | Sony | 301-303 | Aiwa | 338, 344 | Broksonic | 319, 317 | Canon | 309, 308 | Daewoo | 341, 312, 309 | Emerson | 319, 320, 316-318, 341 | Fisher | 330, 315 | Funai | 338 | GE | 329, 304, 309 | Go Video | 322 | Goldstar | 332 | Hitachi | 306, 304-305, 338 | JVC | 314, 336-337, 345-347 | Kenwood | 314, 336, 332, 337 | LXI (Sears) | 332, 305, 330, 335, 338 | Magnavox | 308-310 | Mitsubishi/MGA | 323-326 | NEC | 314, 336-337 | Panasonic | 308-309, 306-307 | Philips | 308-310 | Pioneer | 308 | Quasar | 308-309, 306 | RCA/PROSCAN | 304-305, 308-309, 311-313, 310, 329 | Realistic | 309, 330, 328, 335, 324, 338 | Sansui | 314 | Samsung | 322, 313, 321 | Sanyo | 330, 335 | Sharp | 327-328 | Sylvania | 308-309, 338, 310 | Symphonic | 338 | Technics | 309, 308 | Toshiba | 312, 311 | Wards | 327-328, 335, 331-332 | Zenith | 331 |
Operating a VCR | Buttons on the remote control | To turn on or off | Press VTR (POWER). | To select a channel directly | Press the 0-9 buttons. | To change channels | Press CH +/-. | To record | Press [Play] and [Record] simultaneously. | To play | Press [Play]. | To stop | Press [Stop]. | To fast forward | Press [Fast Forward]. | To rewind the tape | Press [Rewind]. | To pause | Press [Pause]. To resume normal playback, press again or press [Play]. | To search the picture forward or backward | Press [Fast Forward] or [Rewind] during playback. To resume normal playback, release the button. | To change input mode | Press TV/VTR. |
Tips - The code numbers for Sony VCR's are assigned at the factory as follows:
VHS | 301 (preset code for the supplied remote control) | 8mm | 302 | Beta or ED Beta | 303 |
MDP (Multi Disc Player) manufacturer code numbers
Manufacturer | Code | Sony | 701 | Panasonic | 704, 710 | Pioneer | 702 |
Operating an MDP | Buttons on the remote control | To turn on or off | Press VTR/DVD (POWER). | To play | Press [Play]. | To stop | Press [Stop]. | | To pause | Press [Pause]. To resume normal playback, press again or press [Play]. | To search the picture forward or backward | Press [Fast Forward] or [Rewind] during playback. To resume normal playback, press [Play]. | To search the chapter forward or backward | Press CH +/-. |
DVD manufacturer code numbers
Manufacturer | Code | Sony | 751 | Panasonic: 753 | Pioneer | 752 | RCA | 755 | Toshiba | 754 |
Operating a DVD player | Buttons on the remote control | To turn on or off | Press VTR/DVD (POWER). | To play | Press [Play]. | To stop | Press [Stop]. | To pause | Press [Pause]. To resume normal playback, press again or press [Play]. | To search the picture forward or backward | Press [Fast Forward] or [Rewind] during playback. To resume normal playback, press [Play]. | To search the chapter forward or backward | Press CH +/-. | To select chapters directly | Press 0-9 + ENTER. | To display DVD menu | Press MENU. | To move cursor in menu | Use your arrow buttons. |
Programming the remote for a cable box or DBS receiver- Press CODE SET.
- Press DBS/CABLE (FUNCTION).
- Use the 0-9 buttons to key in the manufacturer's code number from the following chart.
- Press ENTER.
For more details on operating the cable box or DBS receiver, please refer to the operating instructions that were supplied with the equipment. Cable Box manufacturer code numbers Manufacturer | Code | Hamlin/Regal | 222-226 | Jerrold/G.I. | 201-208, 218 | Oak | 227-229 | Panasonic | 219-221 | Pioneer | 214, 215 | Scientific Atlanta | 209-211 | Tocom | 216, 217 | Zenith | 212, 213 |
DBS Receiver manufacturer code numbers Manufacturer | Code | Sony | 801 (preset code for remote control) | General Electric | 802 | Hitachi | 805 | Hughes | 804 | Panasonic | 803 | RCA/PROSCAN | 802, 808 | Toshiba | 806, 807 |
|
|
|