Your Universal Remote Control Center
RemoteCentral.com
General Consumer Remotes Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 4 made on Sunday January 16, 2022 at 06:40
Barf
Long Time Member
Joined:
Posts:
August 2013
350
So I looked into your previous thread, which considers Xiaomi decodes. (Since that thread, Xiaomi has been incorporated into IrScrutinizer.) So why do your decodes do not decode as Xiaomi? Turns out that the frequency is slightly wrong. (You can set the frequency tolerance in IrScrutinizer with Options -> Protocol Parameters -> Frequency tolerance; if you set it to 3000, the signals will decode.)

So select "Xiaomi" as protocol, 134 as D, * as F, and you should be set.

Assuming that your captures really are true, and you believe in its frequency measurement, you may like to change the second number of the generated signals from "0073" to "006C".


Hosting Services by ipHouse