On June 2, 2021 at 07:24, Gman said...
We are installing a Dahua system and customers router is in a very difficult location. In order to save some time, we would like to run all of the camera cables to one location and then one cat cable to the router. We would be using a POE switch at the camera head end then from there up to the router on the second floor with a LAN run. Have never not run cable to the NVR so my question is...is there going to be issues with the NVR seeing the cameras if they are not directly connected to the NVR?
Should work great. This is the exact brand and scenario we use for C4 projects that require the PoE cams to be
outside of the internal NVR for individual driver setup on each cam. You just point the NVR to the cam IP's. The native dahua app works fine in this setup too.