| Post 8 made on Thursday September 10, 2020 at 11:40 |
g007 Long Time Member |
Joined:
Posts: | October 2015
87 |
|
|
cried
The most important spec first, is the input voltage, if it calls for 230VAC you can not use 240VAC, period. The next spec is the power frequency. If your unit says 50/60Hz your ok, you can use a 50Hz transformer on 60Hz but NOT the other way around!
You mention the quantity of the units, how many are you going to use?
I would run multiple dedicated 20 Amp 120 circuits, each on the same leg, not opposite legs. 240VAC circuits are used for large power consumption devices in the US.
| |
|
|
