Hi all.

My Musical Fidelity amp's volume adjustment works, but lacks the sensitivity for me to control it as I'd like - it moves up and down too much, so sometimes the only options are slightly too loud, slightly too quiet or get up and adjust it manually. Clearly this won't do...

I've managed to add some sensitivity by reducing the transmit duration in PEP2, but even reducing it to the smallest figure the issue is still there. I gather that there is a duration element built in to hex codes, and was wondering if anyone could suggest how I might try progressively shortening it in these two:

Vol +

0000 006D 0000 0018 0030 0010 0010 0030 0030 0010 0030 0010 0010 0030 0010 0030 0010 0030 0030 0010 0010 0030 0010 0030 0010 0030 0010 052F 0030 0010 0010 0030 0030 0010 0030 0010 0010 0030 0010 0030 0010 0030 0030 0010 0010 0030 0010 0030 0010 0030 0010 0D2F

Vol -

0000 006D 0000 0018 0030 0010 0010 0030 0030 0010 0030 0010 0010 0030 0010 0030 0030 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 052F 0030 0010 0010 0030 0030 0010 0030 0010 0010 0030 0010 0030 0030 0010 0010 0030 0010 0030 0010 0030 0010 0030 0010 0D2F

Been meaning to look at this for a while, and I guess whilst we're confined to home in the UK now's as good a time as any!

Thanks in advance. (I did look at another thread on here but it left me slightly confused as to how I might apply it!)