Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 3 made on Sunday December 1, 2019 at 19:35
davidcasemore
Super Member
Joined:
Posts:
January 2003
3,024
On December 1, 2019 at 08:25, james_aa said...
Where as with a Dali system a new Dali driver would need to be re-configured and added into the Dali control system, most electricians would not be capable of doing this as most are not Lutron registered.

You're confusing DALI (all caps) with Lutron's proprietary EcoSystem. They both have the same basic functions, and Lutron's HWQS supports both. Even though DALI is an open standard, if it's being linked to a HWQS system then yes the person would need to be Lutron certified.

The thing that I love about addressable lighting is that it can be limitlessly changed on the fly. We've probably all had a client who asked if one of the three recessed lights above, say, the piano, can be on by itself to put a dramatic light on the piano. You have to explain that because all three lights are wired together there's nothing you can do. The electrician would have to pull new wires. With DALI or EcoSystem it's a simple matter of re-addressing the driver.

But the argument about needing a Lutron certified person doesn't just apply to these drivers. Any of the Lutron devices with serial number addressing requires such a person. If you replace an RF dimmer, a keypad of any type, a Pico remote etc. then you need a Lutron certified person.
Fins: Still Slamming' - One Trunk at a Time


Hosting Services by ipHouse