Your Universal Remote Control Center
RemoteCentral.com
Custom Installers' Lounge Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 3 made on Thursday June 13, 2019 at 17:57
PostyMcPostface
Long Time Member
Joined:
Posts:
February 2018
17
I had one of these laying around so I took a look, the VLAN option only works with a trunk port.

When you setup the switch for JAP, all of the "control" ports are always untagged access ports so OVRC won't find anything JAP related, and if it does I'd be concerned.

Since you already have the static route, the correct way would be to add the IPs of the JAP devices manually which it doesn't look like this stupid thing can do unless I'm mistaken. So it seems you're mostly SOL

Now technically - you could tag one of those control ports with VLAN10 (JAP RX VLAN) and put the OVRC on that port. Use VLAN 10 in the settings, and set an IP that's not in use by a JAP device and you should be able to see all of your RX.

You won't be able to do this with the TX - as those will sending multicast video.

If none of that makes sense I suggest ignoring that option


Hosting Services by ipHouse