Post 9 made on Sunday April 7, 2019 at 13:33 |
Trunk-Slammer -Supreme Loyal Member |
Joined: Posts: | November 2003 7,462 |
|
|
2 bar equals roughly 30 PSI, which is pretty low for a sprinkler system, coupled with the 12 LPM that equals slightly more than 3 GPM, which is also pretty low for any sprinkler system.
That might well seem to be your main problem.
It's a matter of pressure and flow and I believe you're exceeding the limit of the pump and well delivery.
I think what you might need to do is break the drip line into 2 or more zones for it to be effective in watering.
I have 60 PSI and 7 GPM at the beach, and even then to get good coverage, I needed 4 zones running impulse heads, misting heads, and a drip line.
|
|
|