Post 3 made on Tuesday February 12, 2019 at 18:51 |
joltman Long Time Member |
Joined: Posts: | February 2019 17 |
|
|
Thanks for the response! I was doing a little more reading and I saw that you had to upload your codes first before you were able to test. I thought I had done that, but I've been working in so many CCP files, that I decided to start fresh. I created a new CCP file, and tried uploading, and the MSC locked up on me. I powered off, and that was most likely a huge mistake. Now, the STATUS light won't come on, and when I plug a USB into the front, the USB2 light doesn't come on. I'm afraid this thing is bricked. I found the reset button on the bottom, but I can't find the procedure to reset the device. I've tried:
1. While POWER is attached, hitting the button. 2. While POWER is attached, holding reset for 15-30 seconds. 3. With POWER disconnected, holding reset for 15-30 seconds.
No joy on any count. Am I screwed?
|
|
|