Your Universal Remote Control Center
Philips Pronto Professional Forum - View Post
Up level
Up level
The following page was printed from


Original thread:
Post 6 made on Monday February 4, 2019 at 12:08
Twelfth Monkey
Regular Member
November 2016
On February 2, 2019 at 10:27, Twelfth Monkey said...
I will still add that to the program, but MF confirm that when there is no disc loaded, play ejects and re-closes, and when a disc is loaded, pressing stop whilst the disc isn't playing will eject it.

Talk about ploughing your own furrow!

The programming function is decidedly oddball, too.

Turns out that the use of stop when a disc is in but not playing doesn't eject the disc, so I can eject without one in but not with one in. Odd. This is the response I got from MF- but that doesn't seem to direct me to a code that I can just C&P into my xcf file, and I am a bit baffled.

Can anyone help, and tell me what RC-5 code 45 is in Pronto-speak?

This is what they said:

Hi Simon,

I have just checked with the Musical Fidelity engineer and he advised that the eject function was not included on the remote in the end.
This was decided as you have to get up to change the disc anyway...

The code for eject is still programmable though.
It is code 45 (decimal) for open/shut tray.

Other codes are apparently standard and documented in table 14 of the following Wikipedia page: (Gap to allow reproduction) wiki/RC-5

Hosting Services by ipHouse