Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 27 made on Tuesday January 15, 2019 at 14:42
jag_man653
Long Time Member
Joined:
Posts:
January 2005
100
This whole thing came up agine in December 2018 when the 722 again failed and had to be replaced. See the final successful outcome at my thread in January 2019. Upshot is the 21.1 remote must be set to IR with slider switch and TV1 address must be set to 1. However, if TV2 is already set to 1, as the Dish tech left it, trying to reset TV1 to 1 fails saying bot can't be set tot he same address. The work-around , strangely, is to first change TV1 to 3 (or anything but 1 or 2), then change TV1 to 1. They both show up as 1 in the System Info screen, and both remotes work perfectly.

NB: I don't have a second TV, and do not have a second Dish remote.
Ed S


Hosting Services by ipHouse