Your Universal Remote Control Center
RemoteCentral.com
Crestron Control Systems Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Tuesday January 15, 2019 at 10:21
Gman
Select Member
Joined:
Posts:
February 2009
2,119
We have a customer that has 2 NEC NP1000 Projectors. We are updating their system with a DMPS3-4K-350-C-AIRMEDIA presentation system. The projectors have a DVI input but not HDMI. The max resolution on the DVI input is SXGA+/60Hz. The DM-RMC-4K-100-C units won't scale so we are going to have to use the HDMI outputs to scale the signal. Without adding the expense of the Crestron scaler units, can we use a 3rd party HDMI extender with a DVI adaptor to the projector?

The customer is unable to change out the projectors and screens due to budget constraints.


Hosting Services by ipHouse