On December 14, 2018 at 12:17, Fins said...
I talked to tech support and found out where everything was going wrong. The HeosDrive is basically 4 separate Heos Amps in a box. So each line input is hardwired to a zone, then digitized on the network to share in other zones. Also, grouping zones does something that causes the delay and elan automatically groups the zones when you pick the same source in more than one zone.
Have you tried to group them without using the Elan, to see if it still has the delay? Is it possible that Elan is grouping before selecting the zone that is supposed to be the Main Zone?
