Have a customer that has a marantz 5008 with a samsung bluray player that has been installed for 4-5 years working perfectly until the last few months where the bluray player works intermittently. It turns on but no picture is displayed. Have done a firmware upgrade on both the player and receiver and nothing works. Replaced the HDMI cable from player to receiver, tried a different player, tried different input on the receiver nothing works. I unplugged and old player from power, moved input on the receiver turned everything on and it works. Then turn everything off as is was and then back on, no picture again. Any ideas

Also I have ran a new HDMI directly from player to tv and just put the audio into the receiver and this works but the client wants the OSD for volume...