Post 1 made on Monday April 16, 2018 at 12:42 |
james_aa Long Time Member |
Joined: Posts: | January 2018 227 |
|
|
Ive got an issue on a site where the electrical supply for the AV equipment isn't on a separate ring main from the rest of the appliances (eg. fridge, freezer, washer / dryer etc..)
The majority of the equipment is connected to the power via a surge protected PDU. The existing electrical supply was there when we started the project so didnt have a chance to spec it.
The problems are as follows :
We have a HDbaseT matrix in the rack connected to a surge protected supply. The RX balun is connected to the matrix over UTP cat6. The RX balun is powered locally as is the TV by a surge protected extension lead. The picture works fine on this TV, but about 15 mins or so the audio cuts out for about 1-2 seconds. I dont think the interval is regular. The TV is using the TVs in build speakers.
Any idea what could be done to rectify this other than putting the AV mains on a serpeate ring main ?
|
|
|