On April 3, 2018 at 10:18, cbond said...
Here are the codes BOSE sent:
POWER ON/OFF
============
0000 006D 0000 0022 0157 00AA 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0040 0015 0040 0015 0015 0015 0040
0015 02FB
MUTE
====
0000 006D 0000 0022 0157 00AB 0015 0015 0015 0040 0015 0015 0015 0040
0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015
0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040
0015 02FB
VOLUME UP
=========
0000 006D 0000 0022 0157 00AA 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015
0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040
0015 02FB
VOLUME DOWN
===========
0000 006D 0000 0022 0157 00AB 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015
0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0040 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0015 0040 0015 0015 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040 0015 0040
0015 02FB
Thank you for a reasoned response. I see that many viewers figured my post was an April Fool's joke, and I should have waited a few days to post. However, I am an experienced configuration manager and felt I had a legitimate question. There is no RF involved in this configuration -- only IR.
NOTICE: I realized that the cutting and pasting to this board seem to have lost some of the codes --- except for the POWER code string. On re-editing the post I don't see anything missing. Only on the posted message do I see them. (Or don't see them, depending on how to use English in this case.)
Sorry that I didn't reply sooner, I was away on vacation.
I tried these code in the mx3000 editor. I did have to delete some extra spaces/line breaks. That may be what the issue was. here is a file with the codes in them. give it a try and see if they work. you should be able to use the transporter function to drag the codes from this file into your main file.
[Link: dropbox.com]
