Your Universal Remote Control Center
RemoteCentral.com
General Pro Remotes Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Wednesday March 7, 2018 at 18:07
SWFLMike
Long Time Member
Joined:
Posts:
January 2007
354
Looked at a remote for my brothers friend. It's an Elan HR2, which I've only seen one or two of before. The system was still up, since they could control things with their phones still, but the HR2 seemed to be stuck in a sort of boot loop.

The message says:

Could not open
'loader_b.bin'
ERROR:
No code file to execute

It flashes this once a minute, and that's all it does. Can't get past that.

I checked the voltage for the power supply to the charging base, which was good (16v, which is what the wall wart said it should be), and got 5v at the pins that the remote rests on, which I would assume is normal since that's USB voltage and it has a USB plug (yeah, a rather large assumption there...). I don't think it's a power issue, but seems like some sort of corrupt file.

Tried the button press combo to get into the setup menu, but that didn't do anything.

Anyone familiar with these? I don't feel I know them well enough to declare it toasted.

EDIT - Also, is the HR200 the same thing? As in, can it replace this unit in the system without any other changes? Thanks

Last edited by SWFLMike on March 8, 2018 11:24.


Hosting Services by ipHouse