Your Universal Remote Control Center
RemoteCentral.com
RTI Control Systems Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Monday March 5, 2018 at 14:00
ldefoe
Lurking Member
Joined:
Posts:
March 2018
2
I’m not an integrator but I got the software from an old friend that used to be an integrator. Anyway, I’m doing work at a friends house on some RTI remotes of this model that work with their home automation system from Crestron. The system is pretty dated but it work well. My issue is that in one room their RTI remote is acting up, it will continuously boot loop and display the RTI boot screen and in between loops it makes a hissing noise. I took it apart and sometimes when I put pressure randomly, it’ll boot and work fine for awhile but then it’ll freeze and do the same thing. Is there some way to fix this? Another issue is that when I attempt to connect it to my laptop and use ID9.8 my windows would say there’s an error with the device and now most recently when I try windows doesn’t recognize it at all. What is going on? I want to get the config off so I can copy it to a new remote or fix this one.


Hosting Services by ipHouse