Post 28 made on Thursday March 1, 2018 at 19:28 |
lbenson Lurking Member |
Joined: Posts: | December 2015 2 |
|
|
Thank you for this thread, it put me in the correct direction. Using a Sony XBR55X900E connecting to direct IR in from a crestron system. The Sony side requires a stereo 1/8 plug and the output from the control system required a mono 1/8 plug. T-S are connected and the R on the stereo side is left open. Using a molded M-M stereo cable, cut one end off and soldered on a 1/8" mono plug. Did not have to strip off the carrier in the Crestron IR driver.
|
|
|