| Post 3 made on Monday January 29, 2018 at 03:03 |
Brad Humphrey Super Member |
Joined:
Posts: | February 2004
2,598 |
|
|
+1
If the installer tighten the tilting screw so much, that it is not practical to push the TV enough to un-tilt and get to the locking screws; then he apparently used a long screw driver and tightened the screw after the fact.
I keep some very long screw drivers around for just this. And I also save those really long hex bars, for those hex screws too.
| |
|
|
