Your Universal Remote Control Center
RemoteCentral.com
Complete Control by URC Forum - View Post
Up level
Up level
The following page was printed from RemoteCentral.com:

Login:
Pass:
 
 

Original thread:
Post 1 made on Sunday January 21, 2018 at 17:22
reggosnell
Lurking Member
Joined:
Posts:
March 2011
4
I recently replaced my media room remote with a MX-450. This is a fairly complicated setup, but everything works except the Oppo BluRay player. The directional arrow keys and select key do not respond to the 450. I have done the "learn" process on one of the arrow keys from the Oppo remote, but no soap. The Oppo remote works fine on it's on. This all works through a Xantech IR system. I had a similar experience with a DinkyLink receiver attached to the same block. It has a carrier adjustment screw and I was able to find the "sweet spot" on it. The same MX-450 is used here. I considered replacing my "pin hole" receiver with this but found that this equipment is 5 times the cost I paid for my 1st DinkyLink (about $20). Hard to find for $100 now. Any suggestions on getting the Oppo to play with the MX-450 better?


Hosting Services by ipHouse