On November 28, 2005 at 16:17, grgcombs said...
with the toggle bit set to 1 (default)
function 12 is power off
function 40 is open tray
with toggle bit set to 0
function 12 is power on
function 40 is close tray
It only seems that way because of limited testing. That is NOT the way the toggle bit works. Reread my earlier post.
So since the open tray is ignored if it's already
open, and close is vice versa ... I could create
a button that effectively does both by including
both IR codes, right?
No. That won't work.