On May 15, 2017 at 16:31, Brian-SnapAV said...
The Veranda TVs are compatible with all SunBrite TV mounts, however, depending on the mount, spacers may be needed in order to allow for space for the power cord off the back as well as access to the media bay. The compatible spacers are available in the hardware packs shipped within the mounts. SnapAV suggests use of the Binary B-540 IR HDBaseT extenders with the Veranda; but others are also compatible.
Not really addressing the issue with the 43". Not sure if the sunbrite articulating mount works or not. It's not a good mount since it doesn't keep its position or keep its level well at all. Should have been the 1st thing Snap redesigned.
On the 43", spacers might help with the cord grip. However, since the media bay door, when opened, overlaps the right side vesa holes, I can't see this helping and only making it worse to gain any access after mounting.
As far as the B-540 extenders, are you referring to all models of the 540 or specifically just the B-540-EXT-230-IR? The 230-IR looks smaller but is limited to 115' on 4K. There is no 330' kit. While you can but 330' in extenders and receivers, they don't have POC, so useless. The other 540 series are the same size as the 520 I have in the pic in the prior post. It just basically fits in the space and have to bendithe hdmi cable around to jamb it into the little recessed pocket at the top. As a side note, your website shows the exact same dimensions for every HDBaseT extender. This can't be right and should be addressed.
