| Post 1 made on Saturday March 25, 2017 at 17:35 |
tca Advanced Member |
Joined:
Posts: | December 2005
845 |
|
|
The new CCR routers no longer have switch chips. We normally set up ports 3&4 on the lan, with port 4 as a slave to port 3. You can't do this any more due to the fact there is no built in switch chip. The only option, I believe, is to bridge the ports together. For those of you who use MikroTik, is bridging the only option, and how much of a hit to performance is there by bridging?
| |
|
|
