Hi Guys,

I recently upgraded my xtreamer Ultra2 (gone to the old mans!) with a xtreamer whizz.

The remove is very basic, no play buttons, just up/down/left/right/enter/return (and a few more).

I'm trying to find out if I can 'create' a code for Play/Stop/Rewind etc..

Here is a sample scan of 'Down' button.

0000 006D 0022 0002 0154 00AB 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 003F 0016 0015 0016 003F 0016 003F 0016 003F 0016 0015 0016 0015 0016 0015 0016 0015 0016 003F 0016 0015 0016 0015 0016 0015 0016 003F 0016 003F 0016 003F 0016 003F 0016 05F6 0154 0055 0016 0E51

From IrScrutinizer, here is what comes back:

protocol = NEC1, device = 0, obc = 14
{38.0k,579,msb}<1,-1|1,-3>(16,-8,A:32,1,^108m,(16,-4,1,^108m)+){A=0x00ff708f}

So, is this a 'standard' that I could then look to grab a PLAY code from a device that uses something similar?