On August 18, 2016 at 20:04, shoogdoog said...
Wow. I actually got it work by copying and pasting the codes; never did that before.
HOWEVER, can't get the "volume up" to work. Tried pasting the code but it didn't work, so I copied the volume down code and manually changed the different 4-digit codes. That didn't work either. So I manually and tediously entered each of the 4-digit codes that comprises the volume up command: nothing.
Will try again tomorrow, unless someone spots my problem here. Otherwise, again thanks to everyone for their input. Not going to give up yet.
Sorry to say, I don't know on the Volume up and down on the TV. My remote is setup (and my 7500 was as well) to Turn on the AVR and the TV on power up and control the volume off the AVR. I never tried to do the TV volume because I have it disabled in my setup.
Sorry about that. You might want to go through the 7500 area if you cant find a code on that page and try volume codes one by one.
I booted up my VM just to double check and I only imported on/off and input codes, not any TV volume. Sorry about that.
And Copying ID code is the best way to get codes... It opens a lot more options for you (there is TON of codes for the 7500 (seems like there is more owners of the 7000/7500 thank the 96/9800 models)....
Last edited by DavidinCT on August 20, 2016 21:22.
