Post 2 made on Tuesday May 10, 2016 at 15:22 |
tweeterguy Loyal Member |
Joined: Posts: | June 2005 7,713 |
|
|
Never done this in the router as we use other services to provide these alerts but my guess is you need to enable a ping server on each interface and then setup an SNMP rule to send out the alerts. From recollection the SNMP settings are located at System:Config:SNMP or System:General:SNMP.
You will also have to enable SNMP on the interface; that should be at System:Network:Interface.
If you can't figure it out, send it up to level 2 at Pakedge. Good luck
|
|
|