The Azur 351R uses the NEC IR protocol device 192. The URC7960 is capable of sending this IR protocol using the STB device setup code 1611. If you prefer to use some other device button than STB, you'll need to follow the procedure in the
7960 extra features manual for changing a device mode to make e.g. the MP3 button act as a STB type button. Then assign setup code 1611 to the e.g. MP3 button. Make sure that the remote blinks twice which indicates that 1611 was accepted. The 5 digit EFCs are:
FM TUNER 00055
BD/DVD 00053
CD/VIDEO1 00054
VIDEO2 00056
AUX/TV 00052
STANDYBY/ON 00181
MUTE ON/OFF 00183
UP 00248
DOWN 00230
STEREO MODES 00186
SUROUND MODES 00164
LIPSYNC 00101
DISPLAY 00247
TUNER-STEREO/MONO 00118
TUNER-STORE 00120
TUNER-MODE 00116
LEFT 00246
ENTER 00231
RIGHT 00244
OSD ON/OFF 00245
BASS/TREBLE 00105
ANALOG STEREO DIRECT 00168
AUDIO INPUT TYPE 00123
BTW, for newer OFA and other remotes made by UEI, most of these commands are sent by setup code Audio 4154.
Edited to correct the setup code to 1611.
Last edited by 3FG on October 1, 2015 01:06.